Need help?Do you have a question about the Phytec phyFLEX-i.MX 6 and is the answer not in the manual?
Provides a high-level overview of the phyFLEX-i.MX 6 module's components and interconnections.
Specifies the essential power and connection requirements for basic module operation.
Detailed pin assignments for the phyFLEX-fix connector X1, Row A.
Detailed pin assignments for the phyFLEX-fix connector X1, Row B.
Detailed pin assignments for the phyFLEX-optional connector X2, Row A.
Detailed pin assignments for the phyFLEX-optional connector X2, Row B.
Detailed pin assignments for the phyFLEX-flex connector X3, Row A.
Detailed pin assignments for the phyFLEX-flex connector X3, Row B.
Details the 5V power input requirement and connector pin assignments.
Lists and describes the various internally generated voltage domains on the module.
Explains boot mode selection via BOOT_MODE pins and BOOT configuration pins.
Information on the DDR3 RAM configuration and access.
Details on the onboard NAND Flash memory, its characteristics and connection.
Details on the SPI Flash memory used for configuration and bootloading.
Information on the onboard GbE PHY, speeds, and signal locations.
General| Brand | Phytec |
|---|---|
| Model | phyFLEX-i.MX 6 |
| Category | Motherboard |
| Language | English |
To Next Page
