Phytec phyFLEX-i.MX 6 - Table 2: Abbreviations and Acronyms Used in this Manual

phyFLEX
®
-i.MX 6 [PFL-A-XL1-xxx
viii  PHYTEC Messtechnik GmbH 2013 L-773e_2
IRAM Internal RAM; the internal static RAM on the
Freescale Semiconductor i.MX 6 microcontroller.
J Solder jumper; these types of jumpers require solder
equipment to remove and place.
JP Solderless jumper; these types of jumpers can be
remove
d
an
d
p
lace
d
b
y hand with no special tools.
PCB Printed circuit board.
PDI PHYTEC Display Interface; defined to connect
PHYTEC display adapter boards, or custom adapters
PEB PHYTEC Extension Board
PMIC Power management IC
PoE Power over Ethernet
POR Power-on reset
RTC Real-time clock.
SMT Surface mount technology.
SOM System on Module; used in reference to the
PFL-A-XL1 /phyFLEX
®
-i.MX 6 module
Sx User button Sx (e.g. S1, S2, etc.) used in reference to
the available user buttons, or DIP-Switches on the
carrier board.
Sx_y Switch y of DIP-Switch Sx; used in reference to the
DIP-Switch on the carrier board.
Table 2: Abbreviations and Acronyms used in this Manual
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.