Phytec phyFLEX-i.MX 6 - LVDS Camera Interface; LVDS Camera Signal Locations (Connector X2)

phyFLEX
®
-i.MX 6
Due to a bug in the current version of the TFTP-hpa daemon the daemon
does not start after the system is rebooted. You have to start it in the
terminal with the following command:
restarttftpd‐hpa
A permanent workaround is to create a file called tftp-hpa under
/etc/network/if-up.d/. Insert the following commands in the file:
#!/bin/sh
restarttftpd‐hpa
After saving the file set the correct permission with
chmod755/etc/network/if‐up.d/tftpd‐hpa.
You have successfully set up the TFTP server. In the future the phyFLEX-
i.MX6 can access to the /tftpboot/ folder to load the images.
6.1.8 Optional Settings
In the
following section we list the optional settings. These settings are not needed for a
successful operation of this Application Guide. They only simplify the handling and the look of
the system.
For this reason we show the modifications without big explanation.
 vim, the improved vi editor is installed.
 Desktop-icons for faster and easier start of required programs are created.
 The following modifications were made to the look of Ubuntu:
– Other wallpaper and associated options are adjusted with the help of gsettings
– The color of the Gnome terminal is changed.
- The scrolling log for the Gnome terminal is changed.
 History-search-backward and history-search-forward in /etc/inputrc is activated.
This allows you to search through your history with the entered string.
 Also there are some scripts that will be executed at the first start after the installation.
These scripts ensure that the right permissions are set for the created user.
Congratulations! You have successfully configured your Ubuntu to work
with.
76
 PHYTEC Messtechnik GmbH 2015 L-781e_7