phyFLEX
®
-i.MX 6
6 Setup your own Linux-Host-PC
This chapter is for developers who want to use there own existing environment and not our
modified Ubuntu version. It is not needed if you are satisfied with our virtual machine.
We will give an overview of the modifications which we made to the Ubuntu version on the
phyFLEX-i.MX6 USB flash drive in comparison to the original Ubuntu in this chapter. In the
following we distinguish between optional and essential modifications. So you can see
faster which changes are important to execute this Quickstart in case you do not want to
use our modified Ubuntu version. You can find a step-by-step instruction of the essential
changes in order to modify your own distribution.
We can not guarantee that the presented changes are compatible to other
distributions or versions. If you want to use another distribution, it might
take a lot of individual initiative. We do not support other distributions.
You should be sure about what you do.
6.1 Essential Settings
In the following section you get a short instruction about the important settings which are
essential to guarantee the execution of the examples in this Application Guide.
6.1.1 Installing Ubuntu
We recommend to have at least 80 GB of free disk space available.
Download Ubuntu 14.04.3 LTS from www.ubuntu.com and create a bootable medium.
Boot Ubuntu from your created boot medi
um.
Select Install Ubuntu in the first Welcome window.
62
PHYTEC Messtechnik GmbH 2015 L-781e_7
To Next Page
Loading...