Quickstart Instructions
Now we ca
n test the newly installed editor nano by trying to open a file with it.
Enternano/etc/profile.
Close nano by pressing CTRL+X.
Close Microcom after nano is closed.
Troubleshooting:
If any problem occurs after writing the kernel or the root filesystem into the
flash memory, you can restore the original kernel (zimage) from the
/tftpboot directory. The root file system is available in the following
directory of the virtual machine:
/opt/PHYTEC_BSPs/phyFLEX-iMX6/build/deploy/images/phyflex-imx6-
2/phytec-qt5demo-image-phyflex-imx6-2-20150915092725.rootfs.ubifs
All files are also downloadable from our ftp server. If you want other
versions also check our ftp server:
ftp://ftp.phytec.de/pub/Products/
For more information about how to update the software on our target,
please refer to our BSP Manual.
In this section you learned how to prepare the partition of the root
filesystem and how to download the root filesystem from a TFTP server into
the flash of the target.
PHYTEC Messtechnik GmbH 2015 L-781e_7 61
To Next Page
Loading...
