Phytec phyFLEX-i.MX 6 - Page 80

phyFLEX
®
-i.MX 6
 Select tab Kit and click on Adds
Name:
phyFLEX‐i.MX6
Device Type:GenericLinuxDevice
Sysroot:/opt/yogurt/iMX6‐PD15.1.1/sysroots/cortexa9hf‐vfp‐neon‐phytec‐
linux‐gnueabi
Compiler:arm‐gcc
Debugger:arm‐gdb
Qt version:iMX6_Qt5.3.2
 Select Debugger on the left side of the window and click on the GDB tab.

Enter following command in the Addition Startup Commands:
setauto‐loadsafe‐path/
74
 PHYTEC Messtechnik GmbH 2015 L-781e_7