Specification Desc./Quantity
4 Instrument panel bulb Type: ALL GLASS
Power: 12V - 2W
Quantity: 5
5 Front turn indicator bulb Type: Spherical
Power: 12V - 10W
Quantity: 1 RHS + 1 LHS
6 Helmet compartment light bulb Type: CYLINDRIC
Power: 12V - 5W
Quantity: 1
7 Rear turn indicator light bulb Type: Spherical
Power: 12V - 10W
Quantity: 1 RHS + 1 LHS
8 Taillight bulb Type: SPHERICAL
Power: 12V - 3W
Quantity: 2
9 Stop light bulb Type: ALL GLASS
Power: 12V - 10W
Quantity: 1
10 License plate light bulb Type: ALL GLASS
Power: 12V - 5W
Quantity: 1
Fuses
The electrical equipment is protected by:
1. Four fuses "A" protecting the outside electrical
socket, located under the right-hand side panel.
2. Four fuses "B" protecting the different circuits,
located in the upper left portion of the glove com-
partment.
The tables show the positions and specifications
of the fuses installed on the vehicle.
CAUTION
BEFORE REPLACING A BLOWN FUSE, FIND AND SOLVE
THE FAILURE THAT CAUSED IT TO BLOW. NEVER TRY
TO REPLACE THE FUSE USING ANY OTHER MATERIAL
(A PIECE OF ELECTRICAL WIRE, FOR EXAMPLE) OR A
FUSE OF A DIFFERENT RATING THAN THAT SPECIFIED.
FUSES A
Specification
Desc./Quantity
1 Diagnostic LED, Clock N.1 4A
2 Headlight (high/low beam bulb) N.1 10A
3 General N.1 15A
4 Helmet compartment lamp, 12V socket, saddle electrical
opening actuator
N.1 15A
B 125-250 Electrical system
ELE SYS - 95
To Next Page
Loading...
