Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
8-3
8.1 Technical details
8 Technical Details
Si-Kennzahlen_alle
Si_Kennzahlen_Erläuterung_1
All the units used within a safety function must be considered when cal-
culating the safety characteristic data.
Technische Daten_Satz Norme n
The standards current on 2010-08 apply.
Cross section of external conductors with screw terminals
Power supply, inputs, auxiliary output, semiconductor out-
puts, test pulse outputs, cascading outputs:
1 core flexible 0.25 - 2.50 mm² , 24 - 12 AWG
2 core, same cross section, flexible:
without crimp connectors or with TWIN crimp connectors 0.20 - 1.50 mm² , 24 - 16 AWG
Torque setting with screw terminals 0.50 Nm
Cross section of external conductors with spring-loaded
terminals: Flexible with/without crimp connectors
0.20 - 2.50 mm² , 24 - 12 AWG
Spring-loaded terminals: Terminal points per connection 2
Stripping length 9 mm
Dimensions
Height 100.0 mm
Width 45.0 mm
Depth 120.0 mm
Weight 226 g
Safety characteristic data
Unit Operating mode EN ISO 13849-
1: 2006
PL
EN 954-1
Category
EN IEC 62061
SIL CL
PFH [1/h] EN ISO
13849-1:
2006
T
M
[year]
Logic
CPU PL e (Cat. 4) Cat. 4 SIL CL 3 1.54E-09 20
Input
SC inputs single-channel PL d (Cat. 2) Cat. 3 SIL CL 2 3.95E-09 20
SC inputs dual-channel PL e (Cat. 4) Cat. 4 SIL CL 3 4.61E-10 20
SC inputs light beam device PL e (Cat. 4) Cat. 4 SIL CL 3 3.95E-10 20
Output
SC outputs single-channel with
advanced fault de-
tection
PL e (Cat. 4) Cat. 4 SIL CL 3 7.65E-10 20
SC outputs single-channel PL d (Cat. 2) Cat. 3 SIL CL 2 8.90E-10 20
SC outputs dual-channel PL e (Cat. 4) Cat. 4 SIL CL 3 7.86E-10 20
Mechanical data
To Next Page
Loading...
