PSENscan Configurator
Operating Manual PSEN sc B 5 Series
1004508-EN-02
46
The configuration in the PSENscan Configurator is labelled GUI.
2. Check the whole report to ensure it is correct.
3. Click on Load.
The configuration in the PSENscan Configurator is downloaded to the connected
device. The connected device goes offline as the configuration is being downloaded.
The configuration settings will not be available again until you Accept or Reject the
configuration.
4. Select Monitoring and check the downloaded configuration.
5. Select Download configuration and Accept or Reject the downloaded configuration.
Check
} Click Accept to activate the downloaded configuration in the connected device and re-
ject the existing configuration on the connected device.
} Click Reject to reject the downloaded configuration in the connected device and con-
tinue to use the existing configuration on the connected device. The downloaded con-
figuration in the connected device will be deleted.
To Next Page
Loading...
