Pilz PSS 3075-3 Series - Safety Information for PSS Systems; Intended Use and Safety Categories

3-1Operating Manual: PSS 3075-3 Series
Safety
Intended use
Programmable safety systems from the PSS 3075-3 series are intended
for use as follows:
• Safety-related applications
in the PSS failsafe section
• Non-safety-related applications in the
PSS standard section
INFORMATION
The following system software is required in order to program the safety
systems:
• PSS WIN-PRO from Version 1.1.2 for
- PSS 3075-3
- PSS 3075-3 DP-S
- PSS SB 3075-3 DP-S
• PSS WIN-PRO from Version 1.3.1 for
- PSS SB 3075-3
- PSS SB 3075-3 ETH-2
- PSS SB 3075-3 ETH-2 SE
• PSS WIN-PRO from Version 1.5.2 for
- PSS SB 3075-3 CANopen
• PSS WIN-PRO from Version 1.8.0 for
- PSS SB 3075-3 ETH-2 CANopen
• PSS WIN-PRO from Version 1.8.2 for
- PSS 3075-3 NR
INFORMATION
Drivers (standard function blocks) from the corresponding Pilz software
package will be required in order to connect to the various standard bus
systems:
• ST-SB-DP-S: Driver for PROFIBUS-DP Slave
• ST SB CANopen: Driver for CANopen
For the standard bus interface ETH-2, the Ethernet Configurator is
available as part of the PSS WIN-PRO system software from Version 1.3.1.