Safety
3-4 Operating Manual: PSS 3075-3 Series
Use of qualified personnel
The safety system may only be assembled, installed, programmed,
commissioned, operated, maintained and decomissioned by qualified
personnel. Qualified personnel are people who, because they are:
• Qualified electrical engineers and
• Have received training from qualified electrical engineers,
are suitably experienced to operate devices, systems, plant and machinery
in accordance with the general standards and guidelines for safety
technology.
EMCD
The safety system is designed for use in an industrial environment.
Interference may occur if used within a domestic environment.
Warranty and liability
All claims to warranty and liability will be rendered invalid if:
• The safety system was used contrary to the purpose for which it was
intended
• Damage can be attributed to not having followed the guidelines in the
manual
• Operating personnel are not suitably qualified.
• Any type of modification has been made (e.g. exchanging components
on the PCB boards, soldering work etc.).
Disposal
The programmable safety system must be disposed of properly when it
reaches the end of its service life.
To Next Page
Loading...
