Pilz PSS 3075-3 Series User Manual

3Operating Manual: PSS 3075-3 Series
Wiring the Inputs and Outputs 7-1
Configuration of the terminals and connector description 7-1
Notes on wiring 7-2
Digital inputs (DI2) 7-4
Example: Single-channel, failsafe input device, without test pulse 7-6
Example: Dual-channel, failsafe input devices, without test pulses 7-8
Example: Single-channel, failsafe input device, with test pulse 7-10
Example: Dual-channel, failsafe input device, with test pulse 7-12
Alarm inputs (DIF) 7-14
Example: Alarm test 7-16
Single-pole outputs (DOS) 7-18
Dual-pole outputs (DOZ) 7-20
Interfaces 8-1
General requirements 8-1
Programming device interface (“PG”) 8-2
Programming device interface RS 232 8-3
Programming device interface RS 485 8-4
User interface (“USER”) 8-5
User interface RS 232 8-6
User interface RS 485 8-7
SafetyBUS p interface (“SafetyBUS p”) 8-8
Interfaces for standard bus connections 8-8
Operation and Maintenance 9-1
Commissioning 9-1
Faults 9-1
PSS and SafetyBUS p functionality 9-1
Standard bus functionality 9-1

Pilz PSS 3075-3 Series Specifications

General

Brand	Pilz
Model	PSS 3075-3 Series
Category	Controller
Language	English