Pilz PSS 3075-3 Series - Environmental, EMC, and Mechanical Data

Technical Details
10-4 Operating Manual: PSS 3075-3 Series
Outputs - dual-pole
Number of outputs
Output current at “1”
Short circuit protection
Limitation of inductive switch-off
Residual current at “0” Signal
Signal level at “0”
Signal level at “1”
Output switch delay
Test pulse
Environmental data
Protection type (EN 60529, 02/00)
Mounting position
Ambient temperature
(EN 60068-2-14, 11/99)
Storage temp. (EN 60068-2-1/-2, 07/94)
Climatic suitability
(EN 60068-2-78, 10/01)
Condensation
Vibration (EN 60068-2-6, 04/95)
Shock
EN 60068-2-27, 03/93
EN 60068-2-29, 04/93
EMC
9
2 A ... 3,5 A see Derating diagrams
Electronic
-U
B
Test pulses: 5 mA for max. 700 µs
12 VDC at both output terminals
U
B
-2 VDC at 3.5 A
50 µs
< 700 µs
IP20
Vertical
0 ... +60 °C
-25 ... +70 °C
93 % r.h. at 40 °C
Not permitted
Frequency range: 10 ... 57 Hz
Amplitude: 0.075 mm
Frequency range: 57 ... 150 Hz
Acceleration: 1g
15g, 11 ms
10g, 16 ms
EN 61000-6-2, 08/02
EN 61000-6-4, 08/02