107
Tilt Mount Unit: PDK-5011
Hook
Closing
Opening
6 Attach the hook on the PDP side hardware to the wall
side hardware.
Note
Do not hold the speakers during the installation work.
Always have at least two people do this task.
Verify that the hook has been hung before
lifting the Plasma Display into place.
Caution
7 Fix the bottom of the hardware with the special screws
removed at step 1 (one on the left and one on the
right).
Special screw (M6)
[507CMX : 427CMX]
To Next Page
Loading...
Need help?
General