237
Integrator Mode
7 Setting the display mode
If the display is installed vertically, set the display mode to ‘V’.
6 Place the cursor on ‘ANGLE’ then use the [2/3] buttons
to change the settings.
Each time a [2/3] button is pressed, the setting changes
as shown below.
H ...... The menu is displayed horizontally.
V ....... Because it is positioned vertically, the menu is
displayed rotated 90°. The menu language is
English.
Note
To return it to a vertical display, from the menu mode, select ‘OPTION‘ = ‘OSD ANGLE’ = ‘H’.
Screen 6
D I S PLAY
OSD
S I Z E
ANGLE
RETURN
:
:
:
SET EXITMENU
LARGE
H
ON
3
3
H
V 2
2
To Next Page
Loading...
