122
Menu Mode
21) SPLIT FREEZE Setting
For setting other than [OFF], the image displayed when the FREEZE button is pressed is displayed in a subscreen as
a freeze-frame image.
Factory setting: OFF
1 Select ‘OPTION’.
2 Place the cursor on ‘SPLIT FREEZE’ then press the [SET]
button to change the setting.
Each time the [SET] button is pressed, the setting changes
as shown below.
• OFF ........... The still picture displayed at the time the
FREEZE button was pressed is displayed
as a single fullscreen image
• S BY S ....... When the FREEZE button is pressed, the
freeze-frame image is displayed in the side-
by-side subscreen
• PIP ............. When the FREEZE button is pressed, the
freeze-frame image is displayed in the
picture-in-picture (left-bottom to left-top)
subscreen.
The ‘SPLIT FREEZE’ setting is common for all inputs.
Screen 2
MENU INPUT1
CHANGE
SET
EXIT
MENU
SCREEN SETUP OPTION
LANGUAGE
ENERGY SAVE
TIMER SETTING
SCREEN MGT.
AUTO SETUP MODE
AUTO FUNCTION
PIP DETECT
PICTURE
:STANDARD
:INACTIVE
:OFF
:ACTIVE
:ENGLISH
SPLIT FREEZE :OFF
3 OFF 3 S BY S 3 PIP
To Next Page
Loading...
