Pioneer PDP-60MXE20

182
5.5.6 QUEST Commands
What are QUEST commands?
• Quest commands output TXD such as adjustment data from the panel’s microprocessor to a PC.
• Adjustment and other data is output in ASCII code.
Note
Command names are given inside brackets < >.
• Data output format
Note
• A QUEST command is invalid when no ID has not been assigned.
• A QUEST command is invalid when a wildcard (*) is used in the ID when sending the command.
7 Quest Command Table
STX (02hex)
Command
(3 Byte)
Data ···· Data
ETX (03hex)
Checksum
(2 Byte)
RS-232C Adjustment
Command
434CMX
505CMX
Command
425CMX
Command
60MXE20
Function
Number direct
Last
memory
Comment
Effective Minimum Maximum
GST QST
+
Obtains status information.
GPI QPI
+
Obtains integrator/PICTURE information.
GWB QWB
+
Obtains integrator/WHITE BALANCE information.
GPS QPS
+
Obtains integrator/SCREEN information.
GSS QSS
+
Obtains SETUP information.
GSO QSO
+
Obtains Menu Integrator/OPTION information.
– QAP
+
Obtains audio status.
– QCI
+
Obtains time information.
– QSU
+
Obtains various machine names.