22
Installation Procedures
Ref. No. Terms
3.3 Installation Procedures
3.3.1 Transportation precautions
• Once the shipping container is opened, transporting the unit in its packaging should be handled by two or more
people. To avoid injury or damage, do not lift the package by its packing bands.
• When transporting or storing the unit, always position it vertically - never horizontally. Horizontal transportation or
storage invalidates the product warranty.
• In transportation or storage of products in original packing, never stack more than two units high.
• For transportation or storage, observe the warnings and instructions on the upper face of the carton.
• The Plasma Display is made of glass. Please handle the panel carefully to prevent it from being damaged.
3.3.2 Unpacking
The original packing material can be re-used to safely ship the Plasma Display. When repacking, it is important to use
the material in the same way as when the unit originally shipped. Failure to pack the panel correctly can damage the
Plasma Display.
1) Packing specifications; 1593 mm (W) × 1022 mm (H) × 434 mm (D), 76.3 kg
1 Upper Carton
2 Under Carton
3 Under Carton
4 Pad
5 Reinforce Carton
6 Mirror Mat
7 Pad
8 Power Cord
9 Remote Control Unit
10 Accessory Case
11 Vinyl Bag
12 Vinyl Bag’s Assembly
13 Wiping Cloth
14 Operating Instructions
15 Caution Sheet
16 Correction Sheet
17 Warranty Card
18 Vinyl Bag (S)
19 Dry Cell Battery (R6P, AA)
20 Binder
21 Ferrite Core
22 Manual (CD-ROM)
1
2
3
4
5
5
6
7
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Correction sheet:
three sheets
22
To Next Page
Loading...
