Pioneer PDP-60MXE20

126
Integrator Mode
2) WHITE BALANCE Adjustment
The adjustable items are R. HIGH, G. HIGH, B. HIGH, R. LOW, G. LOW and B. LOW.
1 Enter the integrator mode.
(Refer to section 5.4.1, “About the Integrator Mode” (pg. 123).)
Select ‘PICTURE’.
2 Place the cursor on ‘WHITE BALANCE’ then press the
[SET] button.
3 Use the [5/∞] buttons to switch between items.
In screen 3, when ‘YES’ is selected for ‘WHITE BAL.
RESET’, all of the WHITE BALANCE adjustment values
return to the factory settings.
4 Use the [2/3] buttons to change a setting.
It is possible to move to another item for adjustment using
the [5/∞] buttons.
Press the [SET] button to return to screen 3.
<Adjustable range> Each item: 0 to 255
INTEGRATOR INPUT1
ENTER
SCREEN SETUP OPTIONPICTURE
SET EXIT MENU
: 2.0
: 12 8
: 0
: 0
: 12 8CONTRAST
BR I GHTNESS
H . ENHANCE
V . ENHANCE
G AMMA
P I CTURE RESET
WH I T E BALANCE
C OLOR DETA I L
Screen 1
ENTER
R. H I G H
G. H I G H
B. H I G H
R. LOW
WH I T E BAL. RESET
RET URN
G. LOW
WHITE BALANCE
B. LOW
:
SET EXIT MENU
128
:
128
:
128
:
128
:
128
:
128
Screen 3
Screen 3
:
SET SET EXIT MENU
128
R. HIGH