Pioneer SC430 - Removing the Cassette Mechanism Module; Removing the Control Unit; Removing the Mechanism Unit

84
FX-MG8156ZT,MG8156ZT-91,MG8317ZT,MG8317ZT-91
- Removing the Cassette Mechanism Module (Fig.3)
Remove the four screws and then remove the
Cassette Mechanism Module.
Fig.3
Cassette Mechanism Module
Mechanism Unit
- Removing the Control Unit (Fig.4)
1. Unbend the tabs at two locations indicated by arrows until straight.
2. Remove the screw F.
3. Disconnect the two connectors, and then remove the Control Unit.
- Removing the Mechanism Unit (Fig.4)
1. Remove the five screws G, and then remove the four Holders and four Dampers.
2. Remove the two springs A, spring B spring C, and four tubes from the hock.
3. Remove the Mechanism Unit from the Chassis.
Control Unit
Fig.4
Holder
Holder
Holder
Damper
Damper
F
G
Holder
Damper
Damper
G
G
G
G
A
A
B
C
Chassis
Tube
Tube
Tube
Tube