Pitco E7 User Manual

1.2 CHECKING YOUR NEW FRYER
Your new fryer and its filter have been carefully packed in two crates. Every effort has been made
to ensure that your fryer will be delivered to you in perfect condition. As you unpack the fryer,
inspect each of the pieces for damage. If something is damaged, DO NOT sign the bill of lading.
Contact the shipper immediately, because the shipper is only responsible for 15 days after delivery.
Check the packing list enclosed with your fryer to ensure that you have received all of the parts to
the fryer. If you are missing any parts, contact the dealer from whom the fryer was purchased. As
you unpack the fryer and its accessories be careful to keep the weight of the fryer evenly distributed.
Element Junction Box
CAUTION
To prevent equipment damage, don't tilt the fryer onto
any two of its casters or pull the unit by the element
junction box.
Locate your Pitco Frialator warranty and fill in the serial number of the fryer and the date received.
You will find the serial number on the plate inside the door. Put your warranty card in a safe place
for future reference. DO NOT return the card to Pitco Frialator.
1.2.1 Check Your Order
The crate containing the fryer unit will also
contain the following:
(2) Fry baskets per fryer
(1) Fry Basket Hanger per fryer
(2) Pitco Cleaner Sample {5}
(1) Drain Clean Out Rod {4}
The crate with the filter module (if applicable)
also contains the filter tools and accessories shown
in Figure 1 -1. These items are very important and
MUST be retained for future use. A complete
description of each component is contained in the
Shortening Filter Procedure in Chapter 2.
(1)
Filter Crumb Catch
{3}
(1)
Precoat Filter Aid
{7}
(1)
Flush Hose (Optional)
{1}
(25)
Filter Sheets
{2}
(1)
Cleaning Brush (Fryer)
{8}
(1)
Fryer Crumb Scoop
{10}
(1)
Filter Crumb Scoop
{6}
(1)
Precoat Measuring Cup
{9}
Figure 1-1 Filter Tools and Accessories
1-2

Pitco E7 Specifications

General

Brand	Pitco
Model	E7
Category	Fryer
Language	English