Pitco E7 User Manual

2.3 O PERATING INSTRUCTIONS - WITH A COMPUTER
Always observe the safety precautions described in the front of this manual before operating the fryer.
Because fryer operation is controlled by the computer, start-up and operation is very easy. The
instructions below describe how to operate the fryer to perform daily fryer operation. Detailed
programming instructions are provided later in this chapter in section 2.4. Fryer covers are available
from your distributor.
2.3.1 Fryer Start Up
a. The fryer power switch is inside each fryer's front door. Press the START side of the OFF-
ON-START power switch and release. The switch will snap back to the ON position. The
computer display will light up.
2.3.2 Product Selection
Place the product in the fryer basket being used and press the computer button for the product. Place
the basket in the fryer tank. The illustration shows a product being prepared using the fries program.
Once pressed, the display on the computer console will change to show cooking time for the product.
2.3.3 Shutdown
Shutdown the fryer by pressing the OFF side of the OFF-ON-START switch. The fryer is now
shutdown and can be cleaned or serviced.
2.3.4 Power Failure
If power is removed from the unit for any reason, it will shut down. To restart the fryer, follow the
Fryer Start-
2-4

Pitco E7 Specifications

General

Brand	Pitco
Model	E7
Category	Fryer
Language	English