Pitney Bowes DA50S - LCD Setup Menu

DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual
A-9
Printer Control Panel Menus and Utilities • Appendix A
Setup Menu
1. Heavy Media Mode
2. Test Print Head
3. Purge Print Head
4. Lines Per Address
5. Communications
a. TCP/IP
b. Line Termination
c. Clear Memory
6. Hex Dump Mode
7. Language
a. Symbol Set
b. Inch/Millimeter
c. Menu Languages
8. Envelope Feed Delay
9. Envelope Auto Eject
a. Auto Eject Mode
b. Mode
10. ROM Revision #
11. Print Head Maintenance
a. Head Maintenance
b. Maintenance Cycle Time
12. Bundle Break*
a. Enable/Disable
b. Break Character
c. Break Character Count
d. Character Orientation
e. Break Location
f. Print Break Characters
g. Break Pause Time
A.4 LCD Setup
Menu
To access the Setup Menu:
Press On Line. The LCD displays “OFF LINE” and the green light goes out.
Press and hold Menu for two seconds.
✍
TIP: Virtually all of the
settings in the printer
control setup menu
are overruled by the
Windows application
sending the print job
to the printer.
✍
TIP: Press Eject - or
Cartridge + to scroll
through the submenus
within a menu or the
settings within a menu/
submenu option.
Press Enter to select
the desired menu op-
tion or a submenu op-
tion, or to define a new
setting.
13. Tray Break*
a. Enable/Disable
b. Break Character
c. Break Character Count
d. Character Orientation
e. Break Location
f. Print Break Characters
g. Break Pause Time
14. Low Ink Warning
a. Display Warning
b. Warning Threshold
c. Stop When Empty
15. Logging Settings
a. Enable Logging
b. Logging Level
*The Bundle Break and Tray Break features are not functional
at the time of this writing but are planned for a future release.