Programming a Scanning Job
Follow these steps to program a scanning job. As you move through the various job settings, a star icon
displays next to the area you are programming, to help guide you through the process.
l Log in
l Initiate job setup
l Select a job
l Enable scanning (OMR On or Off)
l Set fold type
l Set the main scanning sheet feeder
l Set the second sheet feeder
l Set the insert feeder
l Set the sealer
l Set paper length
l Set fold A
l Set fold B
l Set envelope depth
l Set envelope stop
l Set batch counter
l Confirm job setup
l Run a trial piece
Product Overview
Pitney Bowes Relay™ 2500, 3500, 4500 User Guide December, 2018 Page 25 of 174
To Next Page
