Setting the Batch Counter
l Batch Counter On - If the batch counter is turned on, it allows pre-defined batches of finished
mailpieces to be automatically processed. When the batch is complete, the inserter automatically
stops.
l Batch Counter Off - If the batch counter is not turned on, the display counter counts the number
of items processed until you tap Reset Counter. Tap the Start button to begin processing the
next batch of mailpieces.
To set the batch counter:
1. Tap the + and – buttons to toggle the batch mode to On or Off.
NOTE: If the batch counter is set to on, the inserter prompts for batch quantity. The default
quantity is 50, but any value can be selected up to 999 by tapping the + and – buttons.
2. Tap the >> button to accept the setting.
Product Overview
Pitney Bowes Relay™ 2500, 3500, 4500 User Guide December, 2018 Page 39 of 174
To Next Page
