Turn on the Inserter
1. Verify the power cord is connected to the socket on the back of the inserter.
2. Verify the power cord is plugged into a power outlet near the machine and is easily accessible.
3. Turn the power switch to the ON position.
Relay 4500 Model shown here
NOTE: On Relay Inserter 2500 and 3500 models, the power switch is located on the front, left side of
the inserter, under the envelope feeder.
Running a Job
Pitney Bowes Relay™ 2500, 3500, 4500 User Guide December, 2018 Page 69 of 174
To Next Page
Loading...
