Safety Information
Follow these precautions whenever you use your inserting system.
General Power Safety
l Place the system close to an easily accessible wall outlet
l Place the system in an accessible location to allow for proper venting of the equipment and to
facilitate servicing.
l Use the AC power adapter included with this device. Third party adapters may damage the device
l Plug the AC adapter directly into a properly grounded wall outlet located near the equipment and
easily accessible. Failure to properly ground the machine can result in severe personal injury
and/or fire.
l The AC adapter (power cord) is the primary means to disconnect this device from the AC supply.
l DO NOT use a wall outlet controlled by a wall switch or one that is shared with other equipment.
l DO NOT use an adapter plug on the line cord or wall outlet.
l DO NOT remove the ground pin from the line cord.
l DO NOT route the AC adapter power cord over sharp edges or trap it between furniture. Make
sure there is no strain on the power cord.
l If the unit becomes damaged, unplug it from the wall.
Operation
l Only trained personnel are permitted to operate this equipment. Training must include instruction
in operation under normal conditions and emergency situations.
l Read all instructions before attempting to operate the equipment.
l Use this equipment only for its intended purpose.
l Keep fingers, loose clothing, jewelry, long hair and neckties away from all moving parts.
l Avoid touching moving parts or materials while the machine is in use. Before clearing a jam, be
sure machine mechanisms come to a complete stop.
l Remove jammed material gently and carefully.
Safety
Pitney Bowes Relay™ 2500, 3500, 4500 User Guide December, 2018 Page 2 of 174
To Next Page
Loading...
