Setting Fold A
Depending on the fold type and paper length settings you selected earlier, the inserter suggests the
correct dimension for the first fold. Usually this setting will be fine.
If you want to keep the setting:
1. Tap the >> button to accept the option and advance to the next setting.
If you want to change the setting:
1. To change the standard fold setting, tap the + and – buttons until the length of required fold
displays.
NOTE: The inserter automatically limits your options to available specifications on your inserter.
As the length of fold A is changed, the dimensions of fold B change automatically to keep within
the correct paper length and inserter specifications.
2. Tap the >> button to accept the fold value and advance to the next setting.
Product Overview
Pitney Bowes Relay™ 2500, 3500, 4500 User Guide December, 2018 Page 57 of 174
To Next Page
