2. Use the side guide adjustment knob to adjust the side guides to the width of the envelopes. Once
the guides are touching both sides of the envelope, turn the adjustment knob 1/4-turn in the
opposite direction. This sets the correct clearance between the guides and the envelope.
3. Aerate the stack of envelopes and fan it so the individual envelopes are not stuck together.
4. Place the stack of envelopes into the feeder with the flap side UP and flap LAST.
Running a Job
Pitney Bowes Relay™ 2500, 3500, 4500 User Guide December, 2018 Page 80 of 174
To Next Page
