Pixsys ATR 142 - Page 37

User manual - ATR142- 37
3
d. p.
Decimal Point
select number of displayed decimal points.
0
> Default
0.0
1 Decimal
0.00
2 Decimals
0.000
3 Decimals
4
Lo .L. s .
Lower Limit Setpoint
lower limit setpoint.
-999…+9999 [digit
3
] (degrees.tenths for temperature
sensors) Default: 0.
5
U P. L.S.
Upper Limit Setpoint
upper limit setpoint.
-999…+9999 [digit
3
] (degrees.tenths for temperature
sensors) Default: 1750.
6
Lo .L.i .
Lower Linear Input
lower range limit AN1 only for linear input.
-999…+9999 [digit
3
] Default: 0.
7
u p.L.i .
Upper Linear Input
upper range limit AN1 only for linear input.
-999…+9999 [digit
3
] Default: 1000.
8
La t c.
Latch On Function
automatic setting of limits for Linear input.
di s .
Disabled > Default
std .
Standard
v.0.s t.
Virtual Zero Stored (parameter 8.10)
v.0.in.
Virtual Zero Initialized (parameter 8.10)