Pixsys ATR 621 series User Manual

20 ATR 621 - User manual
7.3 Simple controller function
1
 controller.
Press Display Do
1
ST
A
R
T
STO
P
Red display shows selected
cycle.
2
Increase until visualize .
3
O
K
or
STA
R
T
ST
O
P
Red display shows 
while green display shows the
setpoint.
4
Increase or decrease setpoint
value.
Enter chosen setpoint value.
5
O
K
Controller modulates the
command output to keep the
programmed temperature.
6
Visualize controller values
cycling.
To modify setpoint  press
and/or arrow keys. To exit,
press
ST
A
R
T
ST
O
P
for a second.
7.4 Output manual control
2
This function allows to modify manually the command output, excluding the
process control. Output will activate in percentage from 0 to 100% according
to time base set on parameter 23  (cycle time) or on parameter 43 
if parameter 1  is set on  .
 controller and follow the table below.
Press Display Do
1
STA
R
T
ST
O
P
Red display shows cycle
selection.
2
Increase until visualize .
1
Access to this function have to be enabled on parameter 32  
2
Access to this function have to be enabled on parameter 32  

Pixsys ATR 621 series Specifications

General

Brand	Pixsys
Model	ATR 621 series
Category	Controller
Language	English