Pixsys ATR142 - Page 33

33
no. Display Parameter description Entering range
37
Alarm 2 Delay
Alarm 2 delay
-180…+180 Seconds
Negative: delay in alarm output
phase.
Positive: delay in alarm entry phase.
Default: 0.
38
Alarm 2
Setpoint
Protection
Alarm 2 set protection.
Does not allow operator
to change value of
setpoint
Default
39
Cooling Fluid
Type of cooling fluid
Default
40
Proportional
Band
Multiplier
Proportional band
multiplier
1.00-5.00
Default: 1.00.
41
(Overlap/Dea
d Band)
Overlapping/Dead band
-20.0-50.0%
Default: 0.
42
Cooling Cycle
Time
Cycle time for cooling
output
1-300 seconds
Default: 10.
∗
The display of the decimal point depends on the setting of parameter
and parameter .