Pixsys ATR142 - Page 35

35
no. Display Parameter description Entering range
45
Visualisation
Filter
Visualisation filter
(Disabled) Default
(Pitchfork filter)
(First Order)
(First Order with Pitchfork)
(2 Samples Mean)
(3 Samples Mean)
(4 Samples Mean)
(5 Samples Mean)
(6 Samples Mean)
(7 Samples Mean)
(8 Samples Mean)
(9 Samples Mean)
(10 Samples Mean)
46
Tune
Tuning type selection
(Disabled) Default
(Automatic)
PID parameters are calculated at
activation and change of set.
(Manual)
Launch from keys or digital input.
47
Setpoint
Deviation
Tune
Select the deviation from
the command setpoint,
for the threshold used by
autotuning to calculate
the PID parameters
0-5000 digit
∗
(tenths of degree if
temperature).
Default: 10.
∗
The display of the decimal point depends on the setting of the parameter
and the parameter .