Pixsys ATR142 - Page 38

38
no. Display Parameter description Entering range
59
Master
Select the master mode
(Disable) Default
(Write Process)
(Read/Write Command Setpoint)
(Write Output Percentage)
(Read/Write Alarm 1 Setpoint)
(Read Process)
60
Address
Retransmission
Select address for
retransmission
0x0000 – 0xFFFF (hexadecimal)
Default: 0x03E9.
61
Lower Limit
Retransmission
Lower limit
retransmission range
-999 – 9999 digit
∗
(degrees if
temperature)
Default: 0.
62
Upper Limit
Retransmission
Upper limit
retransmission range
-999 – 9999 digit
∗
(degrees if
temperature)
Default: 0.
∗
The display of the decimal point depends on the setting of parameter
and parameter .