Pixsys ATR142 - Page 37

37
no. Display Parameter description Entering range
52
Maintenance
Time
Maintenance time for
pre-programmed cycle
00.00-24.00 hh.mm
Default: 00.00.
53
User Menu
Cycle
Programmed
Allows the rise gradient
and the maintenance
time to be changed from
the user menu, in pre-
programmed cycle
functioning
(Disabled) Default
(Gradient)
(Maintenance Time)
(All)
54
Visualization
Type
Select visualization for
display 1 and 2
(1 Process, 2 Setpoint) Default
(1 Process, 2 Hide after 3 sec.)
(1 Setpoint, 2 Process)
(1 Setpoint, 2 Hide after 3 sec.)
55
Degree
Select degree type
: Centigrade
Default
:Fahrenheit
56
Baud Rate
Select baud rate for
serial communication
Default
57
Slave
Address
Select slave address for
serial communication
1 – 254
Default: 254.
58
Serial Delay
Select serial delay
0 – 100 milliseconds
Default: 20.