Pixsys DRR245 - Gradient and Maintenance Time; Visualization Types and Degrees

User manual - DRR245 45
62
Grad.
Gradient
Rising gradient for Soft-Start or pre-programmed cycle
0 Disabled
1-9999 [Digit/hour
1 p. 55
] (degrees/hour with display of tenth for
temperature sensor). Default: 0.
63
m a . ti .
Maintenance Time
Maintenance time for pre-programmed cycle
00.00-24.00 hh.mm. Default: 00.00
64
u.m.c.p.
User Menu Cycle Programmed
Allows to modify rising gradient and maintenance time, from user menu,
when pre-programmed cycle is operating
di s .
Disabled (Default)
Grad.
Gradient
m a . ti .
Maintenance time
ALL
Both gradient and maintenance time
65
ui . tY.
Visualization Type
Select visualization for display 1 and 2
1. p. 2. s .
1 Process, 2 Setpoint (Default)
1. p.2.H.
1 Process, 2 Hide after 3 sec.
1.s.2.P.
1 Setpoint, 2 Process
1.s.2.H.
1 Setpoint, 2 Hide after 3 sec.
1.p.2.a.
1 Process, 2 Ampere (T.A. input)
1.p.2.E
1 Process, 2 Emissivity for infrared sensors
66
d eG r.
Degree
Select degree type
c
Centigrade (Default)
f
Fahrenheit