PLANET ECLIPSE GEO CS1 - Reset: Factory Reset

FIG-2
FIG-1
–
+
1
B
A
HEX
1/8
38
GEO:CS1
A
RESET
FACTORY RESET
Follow these steps in order to set the CS1 to the way that it left
the factory.
FIG-1
Load the factory preset from the LOAD menu (page 22).
FIG-2
Using the 1/8 hex key
A
turn the velocity adjuster screw
B
3 turns
clockwise from it’s fully screwed-out position.
1
DO NOT turn the adjuster screw in too far. This will prevent the
CS1 from ring.