EasyManua.ls Logo

PLANET ECLIPSE GEO CS1 - Support: E-Portal

PLANET ECLIPSE GEO CS1
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56
GEO:CS1
SUPPORT
E-PORTAL
E-portal is a PC application that lets you connect to your CS1 via a USB
cable. Amongst other things you can use E-portal to:
1
Upgrade the CS1 rmware.
2
Change the start-up splash screen.
3
Modify control parameters.
E-portal can be downloaded from the Planet Eclipse website (see below).
Requirements
Monitor Resolution - 1024x768 or higher
1GHz processor
1Gb RAM
Microsoft
®
Windows
®
7 / Windows® 8 / Windows® 10
1
10Mb of storage space
A USB 2.0 Type A - Micro B
2
cable is required to connect the CS1 to a
PC. This cable is not supplied with the CS1 but is available from any good
electrical retailer.
1 Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
2 This is the older, 5 pin Micro B connector NOT the newer USB 3.0 Micro B connector.
Download E-Portal from our marker support page below:
PLANETECLIPSE.COM/EPORTAL
WARNING!
Ensure the CS1 is fully unloaded before connecting to a PC. The air system and
loader should be disconnected and any paintballs should be removed from the
breech of the marker.
WARNING

Related product manuals