Planet SGSW-4802 User Manual

66
4.2.6.3 stp show bridge
This command allows viewing the Bridge Parameters of STP. The screen in Figure 4-49 appears.
Figure 4-49: STP show bridge Screen
4.2.6.4 stp set port <port number> <-c PathCost>
This command allows assigning pathcost to each port. The available range is 1-65535.
Figure 4-50: STP Pathcost Screen

Planet SGSW-4802 Specifications

General

Brand	Planet
Model	SGSW-4802
Category	Switch
Language	English