Planet VC-201A User Manual

7
will up to 100/55Mbps for asymmetric data rate within 200m
and up to 25/4Mbps for asymmetric data rate at 1.6km.
The VC-202A (BNC) performance is up to 100/65Mbps for
asymmetric data rate within 200m and up to 25/5Mbps Mbps
for asymmetric data rate at 3.0km. This capability is ideal for
use as an Ethernet extender for your existing Ethernet network.
PLANET VDSL2 Converter provides a much cheaper replacement
and smooth migration for existing Long Reach Ethernet (LRE)
networks.
The cable specications of the connection are listed as following:
10Base-T, Category 3, 4 or 5 UTP
100Base-TX, Category 5, 5e or 6 UTP
Ethernet over VDSL2, Twisted-pair telephone wires
Ethernet over VDSL2, Coaxial cable
The two drawings pictures are typical application for the Ethernet
over VDSL2 Converter.
Note
Slave device (CPE) must connect to Master device
(CO) through the telephone wire or coaxial cable.
It is not allow connecting like Master to Master or
Slave to Slave. To define the VC-201A / VC-202A /
VC-204 to CO or CPE, please refer to section 2.2.1
for more detail.
l
l
l
l

Planet VC-201A Specifications

General

Duplex system	Full, Half
Auto MDI/MDI-X	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Converter input interface	100Base-TX
Maximum data transfer rate	100 Mbit/s
Fiber optic connector	-
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Wavelength	- nm
Maximum transfer distance	1600 m
Internal	No
Certification	FCC Part 15 Class A, CE
Product color	Black
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	69 mm
Width	97 mm
Height	26 mm
Weight	400 g