address, country, current time,
• Current Wireless Settings
4.2.2 Save/Reload
Click “Status
Save/Reload” a
to save and apply all configurations.
to cancel the unsaved changes and revert to the previous settings that have been saved.
not necessary to save and apply the settings if unsaved changes list is empty.
hows the general system information such as
address, country, current time,
hows Local Area Network settings such as the
DHCP server, and Rx/Tx packets.
hows Wide Area Network settings such as the
address, subnet mask, primary and secondary
hows wireless information such as
operation mode, wireless mode,
information about each SSID,
will be displayed.
Figure 4-4 Save/Reload
to save and apply all configurations.
to cancel the unsaved changes and revert to the previous settings that have been saved.
not necessary to save and apply the settings if unsaved changes list is empty.
address, subnet mask, primary and secondary
operation mode, wireless mode,
information about each SSID,
to cancel the unsaved changes and revert to the previous settings that have been saved.
To Next Page
