Planet WAP-500N - Log; Diagnostics; Figure 4-49 Log

4.6.10 Log
Click “Management

Log” to
enable/disable system log.
The page includes the following settings
Object
Description
• Syslog
Enable or disable the syslog function.
• Log Server IP Address
Enter the IP address of the log server.
• Local Log
Enable or disable the local log service.
• Save/Apply
Click
• Cancel
Click
4.6.11 Diagnostics
Click “Management

Diagnostics
utilities.
User Manual of
WAP
-71-
enable/disable system log.
Figure 4-49 Log
The page includes the following settings
:
Description
Enable or disable the syslog function.
Enter the IP address of the log server.
Enable or disable the local log service.
Click
Save/Apply to apply all changes.
Click
Cancel to cancel the settings.
” to
test the connection and performance through the built
WAP
-500N/WBS-500N
test the connection and performance through the built
-in diagnostics