User Manual of WDAP-C3000AX, WDAP-3000AX, WDAP-W3000AX
- 51 -
Press this button for the next step.
Press this button for the previous step.
Press this button to undo any changes made locally and revert to
previously saved values.
Step 6: Security Setting
Set up the Security Settings as shown in Figure 4-14.
Figure 4-14: Setup Wizard –Security Setting
The SPI Firewall prevents attack and improper access to network
resources.
The default configuration is enabled.
SYN Flood is a popular attack way. DoS and DDoS are TCP
protocols. Hackers like using this method to make a fake connection
that involves the CPU, memory, and so on.
The default configuration is enabled.
ICMP is kind of a pack of TCP/IP; its important function is to transfer
simple signal on the Internet. There are two normal attack ways
which hackers like to use, Ping of Death and Smurf attack.
The default configuration is disabled.
Enable the function to allow the Ping access from the Internet
network.
The default configuration is disabled.
To Next Page
Loading...
Need help?
General
