Planet WNAP-1110 User Manual

Step 3: Click "PBC" button of utility now to start to establish wireless connection by WPS, and
please be patient (This may require several seconds to one minute to complete). When
you see "WPS status is connected successfully" message, it means the connection is
successfully connected by WPS, and the information about AP will be
displayed.
Method Two:
Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-4,
then the following screen will appear.
16

Planet WNAP-1110 Specifications

General

Brand	Planet
Model	WNAP-1110
Category	Wireless Access Point
Language	English