User’s Manual of WNRT-300
-29-
4.4.3. Security
Choose menu “Wireless Security”, and you can configure the settings of wireless security for the
wireless network in this page. After the configuration, please click the “Apply Changes” button to save
the settings.
Figure 4-14 Wireless Security
Object Description
Select SSID
Select the SSID you want to configure the wireless security function,
includes the root one and the client one.
Disable:
No security setup for wireless connection.
WEP:
It is based on the IEEE 802.11 standard. And the default setting of
authentication is Automatic, which can select Open System or
Shared Key authentication type automatically based on the wireless
station's capability and request. Furthermore, you can select Key
Length and enter 10 & 26 Hexadecimal digits (any combination of
0-9, a-f, A-F, zero key is not promoted) or 5 & 13 ASCII characters in
the Encryption Key field.
Encryption
WPA / WPA2 / WPA-Mixed:
When you select the authentication mode based on Enterprise
(Radius Server), please enter the IP Address, Port, and Password
of the Radius Server. When you select the other authentication mode
based on Personal (Pre-Shared Key), please enter at least 8 ASCII
characters (Passphrase) or 64 Hexadecimal characters. All of the
Cipher Suites support TKIP and AES.
To Next Page
Loading...
