Planet WNRT-300 - Access Control

User’s Manual of WNRT-300
-30-
802.1x Authentication Enable 802.1x authentication function, then please enter the IP
Address, Port, and Password of the Radius Server.
4.4.4. Access Control
Choose menu “Wireless  Access Control”, you can choose to allow or deny the computer of
specified MAC address to connect with the WNRT-300 in this page. After the configuration, please
click the “Apply Changes” button to save the settings.
Figure 4-15 Wireless Access Control
Object Description
Wireless Access
Control Mode
You can choose to set the Allowed-List, Denied-List, or disable this
function.
MAC Address
Enter the MAC address you want to allow or deny to connect to the
WNRT-300 in the field.
Comment
You can make some comment for each MAC address on the list.
Current Access Control
List
You can select some MAC address, and click the “Delete Selected”
button to delete it.