EasyManuals Logo

Planet XT-705A User Manual

Planet XT-705A
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
Instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference, in which case the user
may be required to take adequate measures.
WEEE Warning
To avoid the potential effects on the environment and
human health as a result of the presence of hazardous
substances in electrical and electronic equipment, end
users of electrical and electronic equipment should
understand the meaning of the crossed-out wheeled bin symbol.
Do not dispose of WEEE as unsorted municipal waste and have
to collect such WEEE separately.
Revision
PLANET 10G/5G/2.5G/1G/100M Copper to 10GBASE-X SFP+
Media Converter User’s Manual
Model: XT-705A
Revision: 1.0 (April, 2018)
Part No: EM-XT_705A_v1.0 (2350-AA5010-000)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet XT-705A and is the answer not in the manual?

Planet XT-705A Specifications

General IconGeneral
Jumbo frames16000
Duplex systemFull, Half
Auto MDI/MDI-XYes
Networking standardsIEEE 802.3ab, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x
Cable types supportedCat5, Cat5e, Cat6, Cat6a, Cat7
Ethernet interface type2.5 Gigabit Ethernet, 5 Gigabit Ethernet, 10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Maximum data transfer rate10000 Mbit/s
Fiber ethernet cabling technology10GBASE-X
Fiber optic connectorSFP+
Connectivity technologyWired
Ethernet LAN (RJ-45) ports1
InternalNo
CertificationFCC Part 15 Class A, CE
LED indicatorsLink, Power
Housing materialMetal
Input current2 A
Input voltage5 V
Power consumption (typical)26 W
Wavelength- nm
Fiber mode structureMulti-mode, Single-mode
Maximum transfer distance60000 m
Fiber cable diameters supported (core/cladding)9/125, 50/125, 62.5/125 µm
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 95 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth70 mm
Width94 mm
Height26 mm
Weight180 g

Related product manuals