2
6
Mini-101U
Before Configuration
The computers on your LAN need to be set up to cooperate with Mini-
101U Print Server.
Please make sure that your operating system already enabled your interface
card on the host and connected to one of the LAN ports on Mini-101U
through Cat.5 cable. Be sure that LEDs on Mini-101U are already on.
In addition, the default IP address of Mini-101U isņ192.168.1.200.Ň
If your operating system is Windows 98/2000/XP, you may be able to
use command ofņipconfigŇto inquire whether you have the correct
IP address or not. If you are using Linux/Unix-Like system, you can use
ņifconfigŇto check your NIC (Network Interface Card) address. The
instructions are as follows:
œWindows98
1.ClickņStartƖProgramsƖMS-DOSŇorņStartƖRunĀŇand type
in ņcommand.exeŇand then press enter.
2.ņMS-DOSŇwindow will appear.
3.TypeņipconfigŇafter the command ofņc:>Ňand then press enter.
4.MS-DOS will appear your NIC address in the window, please take notice
of the value ofņIP AddressŇandņDefault Gateway.Ň
5.The value ofņDefault GatewayŇis the IP address of Mini-101U.
œWindows2000/XP
1.Please make sure that you do have the authority to access as anņ
AdministratorŇor you are already one of theņSystem Administrators.Ň
2.ClickņStartƖProgramsƖAccessoriesƖCommand PromptŇor
ņStartƖRunĀ,Ňand then type inņcmd.exeŇand press enter.
3.It will appear aņMS-DOSŇwindow.
4.TypeņipconfigŇafter the command ofņc:>Ňand then press enter.
5.MS-DOS will appear your NIC address in the window, please take notice
of the value ofņIP AddressŇandņDefault Gateway.Ň
6.The value ofņDefault GatewayŇis the IP address of Mini-101U.
To Next Page
Loading...