œLinux / Unix-Like
1.At first please make sure that your NIC are already enabled and works
properly.
2.And be sure you haveņrootŇnumber or your already are one of the
members of aņrootŇgroup.
3.Please typeņifconfigŇofņifconfig -aŇafterņ#Ňand then press enter.
4.It will appear your present NIC address in the window, please take notice
of the value ofņIP AddressŇandņGateway.Ň
5.The value ofņGatewayŇis the IP address of Mini-101U.
If you can getņIP AddressŇandņGateway,Ňnormally, it means that
you may use web browser to configure Mini-101U. Type your destination
ęņhttp://192.168.1.200Ň(default IP Address of Mini-101U) o n the
Address Bar in the web browser. If you have changed the default IP
Address of Mini-101U, please type in the new address on the address bar.
1.1.Administrator Installation
The installation wizard will install the following programs:
ŜInstall all the necessary utilities and drivers
ŜGuide you through the print server setup process to install and configure
your print server (including setting up several protocols and settings)
ŜAdd a new print server network port on your computer.
In order to let you make a connection successfully between Mini-101U
Print Server and your network/computer, we suggest that you should assign
a static IP address for your computer, for example, 192.168.1.100 (Mini-
101U Print Server's default IP address is 192.168.1.200) that will help
while setting up the connection. After giving an IP address, please follow
the steps below to start the Installation:
To Next Page
Loading...