2
58
Mini-101U
10.The system will automatically complete adding the printer and show
the information as follows. The new printer port already became
ņPSxxxxxx-P1Ň(xxxxxx is the last 6 digit of print server's MAC ID).
After checking the information below, please clickņFinishŇto exit the
Add Printer Wizard.
11.To make sure that you already installed the printer completely, please go
back to the desktop and clickņStartƖSettingsƖPrintersŇon the task
bar. There will show you the icon of the printer which you just installed.
Right click on the printer icon and then clickņProperties.ŇChoose
theņPortsŇtab to check if the printer port was installed correctly (It
should show the name of PSxxxxxx-P1). ClickņOKŇto exit.
To Next Page
Loading...